New Dziekan agregat Hercules 2,1m AUH21 cultivator
≈ $2,109
Rzędziany7466 km from you
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+48 724 80...
Show
+48 724 800 805
+48 603 42...
Show
+48 603 420 260
Poland 
2.8 m
Poland, Rzędziany
3 m
Poland, Przedbórz, Łódzkie
3 m
Poland, Nądnia
4.2 m
Poland, Przedbórz, Łódzkie
- Working width: 2.1 m
- Working depth: 13 cm
- Number of tines from 14 to 21 pieces: Depends on the tine diameter (30x10 mm, 40x10 mm)
- Non-stop auger protection
- Front string roller: ø350 mm
- Rear crumbling roller: ø320x2 mm
- Rollers with bearings
- Weight: 550kg
- Power requirement: 40-55 hp
EXPORT: ONLY THE NET AMOUNT NEED TO PAID (with valid EU- VAT number)/ TRANSPORTATION WORLDWIDE POSSIBLE at good conditions. Offer valid while stocks last
- Arbeitsbreite: 2,1 m
- Arbeitstiefe: 13 cm
- Zinkenzahl ab 14 bis 21 Stk: Abhängig von Zinkendurchmesser (30x10 mm, 40x10 mm)
- Schneckensicherung Non-Stop
- Vorne Saitenwalze: ø350 mm
- Hinten Krümmelwalze: ø320x2 mm
- Walzen gelagert
- Gewicht: 550 kg
- Leistungsbedarf: 40-55 kg
Das Angebot gilt solange der Vorrat reicht.
Bei Export ist nur der Nettopreis zu bezahlen (unter Angabe der gültigen USt.-ID Nummer).
Wir organisieren gerne Transport für Sie
- Anchura de trabajo: 2,1 m
- Profundidad de trabajo: 13 cm
- Número de púas de 14 a 21 piezas: Depende del diámetro de las púas (30x10 mm, 40x10 mm)
- Protección del sinfín sin paradas
- Rodillo desmenuzador delantero: ø350 mm
- Rodillo desmenuzador trasero: ø320x2 mm
- Rodillos con cojinetes
- Peso: 550 kg
- Potencia necesaria 40-55 CV
EXPORTACIÓN: SÓLO HAY QUE PAGAR EL IMPORTE NETO (con número de IVA comunitario válido)/ POSIBILIDAD DE TRANSPORTE A TODO EL MUNDO en buenas condiciones. Oferta válida hasta fin de existencias
- Largeur de travail : 2,1 m
- Profondeur de travail : 13 cm
- Nombre de dents de 14 à 21 pièces : Dépend du diamètre des dents (30x10 mm, 40x10 mm)
- Protection non-stop de la vis sans fin
- Rouleau à cordes avant : ø350 mm
- Rouleau émietteur arrière : ø320x2 mm
- Rouleaux avec roulements
- Poids : 550 kg
- Puissance requise : 40-55 hp
EXPORTATION : SEUL LE MONTANT NET DOIT ÊTRE PAYÉ (avec numéro de TVA UE valide)/ TRANSPORT MONDIAL POSSIBLE à de bonnes conditions. Offre valable dans la limite des stocks disponibles
- Larghezza di lavoro: 2,1 m
- Profondità di lavoro: 13 cm
- Numero di denti da 14 a 21 pezzi: Dipende dal diametro dei denti (30x10 mm, 40x10 mm)
- Protezione non stop della coclea
- Rullo anteriore: ø350 mm
- Rullo sminuzzatore posteriore: ø320x2 mm
- Rulli con cuscinetti
- Peso: 550 kg
- Potenza richiesta: 40-55 CV
ESPORTAZIONE: È NECESSARIO PAGARE SOLO L'IMPORTO NETTO (con partita IVA valida per l'UE) / È POSSIBILE IL TRASPORTO IN TUTTO IL MONDO a buone condizioni. Offerta valida fino ad esaurimento scorte
- Szerokość robocza: 2,1m
- Głębokość robocza: 13 cm
- Ilość zębów od 14 do 21 sztuk: W zależności od średnicy zębów (30x10 mm, 40x10 mm)
- Zabezpieczenie ślimakowe non-stop
- Przedni wał strunowy: ø350 mm
- Tylny wał kruszący: ø320x2 mm
- Wały łożyskowane
- Waga: 550 kg
- Zapotrzebowanie mocy: 40-55 KM
Oferta ważna do wyczerpania zapasów. Podana cena jest ceną netto
- Ширина захвата: 2,1 м
- Глубина обработки: 13 см
- Количество зубьев от 14 до 21 шт: Зависит от диаметра зубьев (30х10 мм, 40х10 мм)
- Защита шнека без остановки
- Передний струнный каток: ø350 мм
- Задний крошащий каток: ø320x2 мм
- Вальцы с подшипниками
- Вес: 550 кг
- Потребляемая мощность: 40-55 л.с.
ЭКСПОРТ: необходимо оплатить только чистую сумму (с действительным номером НДС ЕС)/ Возможна транспортировка по всему миру на хороших условиях. Предложение действительно до тех пор, пока есть запасы